From rapid prototyping and design for manufacturing before the first part is machined

Beyond the semiconductor components themselves, today’s electronics products need to be enclosed and packaged in consumer-usable form factors machined from various specialty metals and alloys. The reality is that a failure in an electronic product package or a non-semiconductor component can be just as catastrophic as a failure with the semiconductor.

Given the critical nature of these components, the ‘cutting edge’ of machining now goes far beyond having the latest CNC equipment and accessories. It also means engaging at the earliest stages of the process using the latest in design for manufacturing (DFM), simulation and process verification processes prior to cutting the first part. It is then critically important to have flexibility and adaptability to make changes and scale production when needed with the ability and commitment to inspect with the most precise tools throughout the process. The goal of this approach is to give customers the knowledge that when machining begins, the parts are going to be 100% right, with zero defects, the first time and every time.

It is important to give customers the knowledge that when machining begins, the parts are going to be 100% right with zero defects. Source: Halcyon Manufacturing

Typically, when a potential customer is looking for a machine shop to make a complex electronic device housing or part, they are looking for the latest equipment and current certifications including ASQ, ISO 9001 and AS9100. There is a tremendous benefit, however, for a customer to look beyond these prerequisites for a machine shop that will work with them from the design phases through manufacturing to predict and resolve failures before they happen. The ability to predict when failures could occur requires proactive communication and early engagement with an expert machine shop.

A Design for Manufacturing process enables the machine shop to anticipate possible complications and limitations in the machining process upfront.

“With Design for Manufacturing, the goal is to make the product manufacturable in an efficient and cost-effective way and that starts with reviewing the parts and discussing the specifications openly,” says Tony Doan, CEO of San Jose, California-based Halcyon Manufacturing, an advanced ITAR Registered and AS9100/ISO9001- Certified manufacturing shop. “The electronic device industry needs a cutting-edge machine shop that has both the expertise and the desire to guide their customers on how to achieve better machined products at a better price.”

This analysis and feedback are part of an ongoing manufacturing collaboration between a client and their contract machining partner well before production starts from the inception of a project through prototyping.

“When you can use the latest simulation and process verification technologies prior to cutting the first chip of metal or plastic, then when you start manufacturing, you know that the parts are going to be right the first time,” says Doan.

Rapid prototyping removes financial and time risk by providing a cost-effective way to test a full range of designs and materials. With rapid prototyping, many iterations of a part may never make it to production, which can save companies time and money.

Cutting edge parts machining means engaging at the earliest stages of the process. Source: Halcyon Manufacturing

“If we understand how the part needs to function, we can 3D print the item in plastic, run it through a few tests, and then proceed – rather than rush to machine parts out of expensive material in the prototype phase,” explains Doan, who adds that in addition to initial prototyping, 3D printing can be used to create workholding and fixtures.

Electronic device manufacturers clients operate in highly dynamic markets and the need for changes to part specifications and the quantity of parts is high. Cutting-edge machine shops must therefore be adaptable and flexible for any design changes. They also must be capable of scaling up production to ‘lights out’ manufacturing if needed without compromising the accuracy of the machining.

“While capacity is certainly important, the overall size of a machine shop is not the most important criterion,” says Doan. “Customers certainly need manufacturing scale, but they also require adaptability as complex manufacturing designs evolve and change. For a machine shop to be an effective partner, they need to be nimble.”

Finally, to complement the machining capabilities and nimbleness, a shop must have advanced metrology equipment for inspections guided by a zero-defect mindset.

“It’s not about making parts and sorting out the bad ones and shipping the good ones. You need a machine shop committed to not making the bad parts at all,” says Doan. “To produce the most precise parts, you must be able to inspect more than the finished goods. A machine shop should be inspecting in real-time such things as the set-ups and the speed throughout the process which enables data to be captured for statistical predictive process control.”

Ideally, automated coordinate measuring machines (CMMs) would perform process inspections and produce first article reports. Also, a digital multimeter (DMM) would be used with scanning capability that can take thousands of data points during a scan of a complex curved surface. This results in very precise and accurate repeatable product evaluations.

Companies that rely on machine shops to produce precision parts to extremely tight tolerances with consistency should look beyond the basic certifications and CNC capabilities for those with the expertise to optimize the manufacturing process before any items are manufactured and adjust as needed after. With this level of flexibility, and by ensuring a zero-defect approach at every stage of the process, those in the electronic device industry can proceed with certainty that the parts they are receiving are of the highest reliability and without unnecessary additional costs for their most critical applications.

This article was written and submitted by Halcyon Manufacturing.

McKenna Institute at the University of New Brunswick is working with IBM Canada to provide education and career readiness resources to students and community members in the province. @UNB @IBM https://bit.ly/3u5z6fd

Rogers Communications has started to deploy its #5G 3500MHz spectrum holdings, with the first location going live in Nanaimo, BC this week. https://bit.ly/3mX4mJ7

Professional Engineers Ontario marks centennial milestone amidst modernization efforts to advance public interest mandate. @PEO_HQ https://bit.ly/3HvpKyI

Vexos, Murata and GMA staffers team-up in tree-planting #environmental exercise this month north-east of Toronto. @VexosTeam @murataps https://bit.ly/3OrwKyZ

Just how big of an impact does the ongoing chip shortage have on the automotive market? Mat Ransom, Director of Supply Chain Programs, Avnet EMEA, spoke to @EPTmagazine about the shortage’s effect on automotive productive lines and revenue. Listen here: https://bit.ly/3Qixrw7